If you’re living in an old house or you’re simply looking to give your home a fresh look, replacing antique door knobs with modern ones can make a significant difference. Modern door knobs are not only sleek and stylish, but they’re also more functional and secure than antique ones. In this article, we’ll go over the steps you need to take to replace antique door knobs with modern ones.
Tools and Materials
Before you get started, you’ll need the following tools and materials:
- Screwdriver
- Measuring tape
- New door knob set
- Pliers
- Wood glue (if necessary)
Step 1: Remove the Old Door Knob
The first step is to remove the old door knob. This is usually done by removing the screws that hold the knob in place. You may need to use a screwdriver to remove the screws. Once the screws are removed, you should be able to pull the knob off the door.
Step 2: Remove the Latch Plate
The next step is to remove the latch plate. This is the metal plate that the door latch goes into. The latch plate is usually held in place by two screws. Use a screwdriver to remove the screws and then pull the latch plate off the door.
Step 3: Measure the Door
Now it’s time to measure the door to make sure that the new door knob set will fit properly. Measure the diameter of the hole in the door where the knob will go. Then measure the distance from the center of the hole to the edge of the door. These measurements are important because they’ll determine what size door knob set you’ll need.
Step 4: Install the New Latch Plate
If the new door knob set you purchased comes with a new latch plate, you’ll need to install it next. The latch plate will need to be screwed into place. Use a screwdriver to tighten the screws.
Step 5: Install the New Door Knob
Now it’s time to install the new door knob. Start by inserting the latch into the hole in the door. Then place the exterior part of the door knob on the outside of the door and align it with the latch. Insert the screws and tighten them with a screwdriver. Next, place the interior part of the door knob on the inside of the door and align it with the latch. Insert the screws and tighten them with a screwdriver.
Step 6: Test the Door Knob
Finally, test the door knob to make sure it’s working properly. Turn the knob to make sure the latch is retracting and the door is opening and closing smoothly. If everything is working properly, you’re done!
Additional Tips
- If the new door knob set doesn’t fit properly, you may need to use wood glue to fill any gaps between the latch plate and the door.
- Make sure to purchase a door knob set that matches the existing holes in your door.
- If you’re unsure about any of the steps, don’t hesitate to consult with a professional.
Conclusion
Replacing antique door knobs with modern ones can give your home a fresh, updated look while also improving its security and functionality. By following these simple steps, you can easily replace your old door knobs with new ones. Remember to take your time and be patient throughout the process. With a little effort, you’ll have stylish and functional door knobs in no time.